| eng Site map  
 
Find!
 
  • ElvaX ProSpector II - handheld XRF Analyzer

    ElvaX ProSpector II - handheld XRF Analyzer

    Elvatech is proud to introduce handheld XRF analyzer - the ElvaX ProSpector II - latest XRF portable spectrometer

    more info

  • ElvaX - XRF analyzer

    ElvaX - XRF analyzer

    ElvaX is a desktop energy-dispersive X-ray fluorescence EDXRF analyzer equipped with miniature X-Ray tube and PIN-diode X-Ray detector.

    more info

  • XRF analyzer - ElvaX mini

    XRF analyzer - ElvaX mini

    ElvaX mini is a compact desktop energy-dispersive X-ray fluorescence - XRF alloys analyzer. It is right and affordable solution for jewelry industry, alloy sorting, express QC in metallurgy (metal analyzers).

    more info

WEEE

Waste Electrical and Electronic Equipment Directive

RoHS analysis

Restriction of Hazardous Substances Directive or RoHS.

Elvatech

Elvatech Ltd. is an R&D enterprise based in Kiev, Ukraine.

X-ray spectroscopy

About XRF spectrometers

Laboratory Equipments

Laboratory Equipments

Accessories for the 2000 Geno/Grinder

Grinding Balls and Accessories

2100 Grinding Ball Dispenser
Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates.

2110M 24-Pin Magnet
24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm) steel grinding balls (2155) from titer plates and vial sets. Works with 2230 titer plate, 2240-PC and 2240-PE Vial Sets, and 3116PC vials in 2190 Vial Rack. Used with 2110S Separator.

2110S Separator for 24-Pin Magnet
Separates 3/8 in. (9.5 mm) steel grinding balls (2155) from 2110M 24-pin magnet. Drops balls into 2230 24-well titer plates, 2240-PC and 2240-PE Vial Sets, or removes balls from magnets after balls are pulled out of wells or vials.

2110M-12 Pack of 12 Magnetic Tips
Each Magnetic Tip is a micropipette tip with a strong magnet. Converts micropipette dispensers into pin magnets for removing 2150 grinding balls from 96-well titer plates. Pack of 12 Magnetic Tips.

2110M-96 Pack of 96 Magnetic Tips
Each Magnetic Tip is a micropipette tip with a strong magnet. Converts micropipette dispensers into pin magnets for removing 2150 grinding balls from 96-well titer plates. Pack of 96 Magnetic Tips.

2150 Grinding Balls 5/32 inch (4 mm)
Made of 440C stainless steel. Used with 2100 Grinding Ball Dispenser and all 96-well titer plates. Sold in bags of 5,000.

2155 Grinding Balls 3/8 inch (9.5 mm)
Made of 440C stainless steel. For use in 2230 titer plate or in 2190 Vial Rack with 3116PC, 2241-PC and 2241-PE Vials to grind extra large or tough samples. Sold in bags of 100.

2156 Grinding Balls 7/16 inch (11 mm)
Made of 440C stainless steel. For grinding large or tough samples in 2230 titer plates and 2250 Vial Sets. Sold in bags of 100.

Grinding Beads

Molecular Biology Grade Grinding Beads are treated to inactivate contaminating enzymes and have been tested accordingly. Low Binding Grinding Beads are coated to reduce non-specific binding of nucleic acids and proteins and are used for lysing dilute samples of cells. Acid Washed Grinding Beads are treated to remove fine particles and contaminants. They are suitable for most basic applications. SPEX SamplePrep offers all three grades in a variety of sizes.

2160 Silica Grinding Beads
Acid washed silica beads, size ranges from 800-1000 μm, 200 gram bottle.

2161 Silica Grinding Beads Molecular Biology Grade
Acid washed RNase/DNase-free treated silica beads, size ranges from 800-1000 μm, 200 gram bottle.

2162 800 μm Low Binding Silica Beads
Acid washed and chemically treated to keep samples from binding to titer plate wells, 200 gram bottle.

2165 Silica Grinding Beads
Acid washed silica beads, size ranges from 400-600 μm, 200 gram bottle.

2166 Silica Grinding Beads Molecular Biology Grade
Acid washed RNase/DNase-free treated silica beads, size ranges from 400-600 μm, 200 gram bottle.

2167 400 μm Low Binding Silica Beads
Acid washed and chemically treated to keep samples from binding to titer plate wells, 200 gram bottle.

2168 100 μm Low Binding Silica Beads
Acid washed and chemically treated to keep samples from binding to titer plate wells, 200 gram bottle.

2170 Silica Grinding Resin
Acid washed irregular silica resin, size ranges from 100-400 μm, 200 gram bottle.

2171 Silica Grinding Resin Molecular Biology Grade
Acid washed RNase/DNase-free treated irregular silica resin, size ranges from 100-400 μm, 200 gram bottle.

2180 Zirconium Grinding Beads Molecular Biology Grade
Acid washed RNase/DNase-free treated zirconium beads, size ranges from 200-400 μm, 250 gram bottle.

2181 100 μm Low Binding Zirconium Beads
Acid washed and chemically treated to keep samples from binding to titer plate wells, 250 gram bottle.

2182 200 μm Low Binding Zirconium Beads
Acid washed and chemically treated to keep samples from binding to titer plate wells, 250 gram bottle.


Racks, Clamps, Holders

2190 Vial Rack
Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball (2155) to grind unusually large or tough samples.

2195 Large Capacity Clamp Assembly An oversize clamp that will hold centrifuge
tubes or a double load of titer plates.
Designed to hold twelve standard 50 mL centrifuge tubes (115 mm length) with 2196 Holder, or twenty-four standard 15 mL centrifuge tubes (119 mm length) with 2197 Holder. Clamp also holds four deep-well titer plates, stacked two per side. Rubber mat for positioning between stacked titer plates is included. The 2195 Clamp Assembly is not available installed on the Geno/Grinder but must be purchased separately. Recommended for Geno/Grinder clamp speeds under 1200 strokes/minute.

2196 Holder for 50 mL Centrifuge Tubes
Thick, rugged foam block holds 12 standard 50 mL centrifuge tubes, 115 mm length. For use with 2195 Large Capacity Clamp Assembly.

2197 Holder for 15 mL Centrifuge Tubes
Thick, rugged foam block holds 24 standard 15 mL centrifuge tubes, 119 mm length. For use with 2195 Large Capacity Clamp Assembly.

Titer Plates and Cap-Mats

Titer Plates and Cap-Mats, Vials, and Vial Sets

While most titer plates can be used in the Geno/Grinder, these sturdy titer plates have been tested extensively with various samples, and resist perforation by steel grinding balls even at high clamp speeds. They can be used for many applications including sample libraries, mother-to-daughter automated plate pipetting, large sample dilutions and cell suspensions. Suitable for RNA extraction when used with 2600 Cryo-Station. Titer plates are made of polypropylene, with alphanumeric marks for well identification. Sold singly or in cases of 100.

Cap-Mats seal titer plate wells, preventing spills and well-to-well contamination. Rugged silicone rubber, may be sterilized and re-used. Sold singly or in cases of 10.

2200-100 96-Well Titer Plate,
Square Wells, Case of 100 Square 2.4 mL wells with a working capacity of 2.0 mL. Case of 100 titer plates.

2200 96-Well Titer Plate, Square Wells
Same as above, but a single titer plate.


2201-10 Cap-Mats for 2200 Titer Plates, Case of 10
Sealing mats for the 2200 Titer Plates, above. Case of 10 Cap-Mats.

2201 Cap-Mat for 2200 Titer Plate
Same as above, but a single Cap-Mat.

2210-100 96-Well Titer Plate, Round Wells, Case of 100
Round 2.0 mL wells, rugged polypropylene, alphanumeric marksfor well identification. For use with the 2650 Cryo-Block, which is inserted in gaps between wells to keep plates and samples chilled to preserve RNA for extraction.

2210 96-Well Titer Plate, Round Wells
Same as above, but a single titer plate.

2211-10 Cap-Mat for 2210 Titer Plate, Case of 10
Sealing mats for 2210 Titer Plates. Tough silicone rubber, prevents leaks and cross-well contamination. Can be sterilized and re-used. Sold in cases of 10 mats.

2211 Cap-Mat for 2210 Titer Plate
Same as above, but a single Cap-Mat.

2220-100 48-Well Titer Plate, Case of 100
Rectangular 5 mL wells with a working capacity of 2 mL per well. Use with 2221 Cap-Mat and multiple 5/32 in. (4 mm) steel grinding balls (2150) per well. Case of 100 titer plates.

2220 48-Well Titer Plate
Same as above, but a single titer plate.

2221-10 Cap-Mat for 2220 Titer Plate, Case of 10
Cap-Mats seal 2220 48Well Titer Plates. Case of 10 Cap-Mats.

2221 Cap-Mat for 2220 Titer Plate
Same as above, but a single Cap-Mat.

2230-100 24-Well Titer Plate, Case of 100
Square 10 mL wells with a working capacity of 4 mL per well. Use with 2231 Cap-Mat, and one 3/8 in. (9.5 mm) steel grinding ball (2155) or 7/16 in. (11 mm) steel grinding ball (2156) per well. Case of 100 titer plates.


2230 24-Well Titer Plate
Same as above, but a single titer plate.

2231-10 Cap-Mat
for 2230 Titer Plate, Case of 10 Cap-Mats seal 2230 24-Well Titer Plates. Case of 10 Cap-Mats.

2231 Cap Mat for 2230 Titer Plate
Same as above, but a single Cap-Mat.

Vials and Vial Sets

Vial sets are an alternative to titer plates. These vial sets are pre-cleaned with grinding balls included. They come in sturdy carriers that have about the same footprint and height as deep-well titer plates, and fit the Geno/Grinder Clamp. Vials can be filled and sealed individually, and the larger vials can hold bigger samples than titer plates. Replacement vials and steel balls can be purchased separately.

2240-PC Pre-Cleaned 5 mL Polycarbonate
Vial Set, Case of 10

Each set includes 24 pre-cleaned 2241-PC vials, each with a 3/8 in. (9.5 mm) steel grinding ball (2155). Ready to use, in a polyethylene carrier with foam vial holder. Carrier fits Geno/Grinder clamp; used in pairs. Grinding load per vial 1.5 mL. Vials can also be used with 2662 Cryo-Block or

2190 Vial Rack.
Case of 10 sets, each set containing 24 vials pre-loaded with steel balls.

2241-PC Polycarbonate Vial
5 mL polycarbonate vial with screw-on polyethylene cap. 1/2 in. diameter x 2 in. long (12.7 mm x 50.8 mm). Holds one 3/8 in. (9.5 mm) steel grinding ball (2155), fits 2240-PC Vial Set, 2662 Cryo-Block, and 2190 Vial Rack. Not pre-cleaned. Grinding load per vial 1.5 mL. Sold in units of 240.

2240-PE Pre-Cleaned 5 mL PolyethyleneVial Set
Each set includes 24 pre-cleaned 2241-PE vials, each with a 3/8 in. (9.5 mm) steel grinding ball (2155). Ready to use, in a polyethylene carrier with foam vial holder. Carrier fits Geno/Grinder clamp; used in pairs. Grinding load per vial 1.5 mL. Vials can also be used with 2663 Cryo-Block or 2190 Vial Rack. Case of 10 sets, each set containing 24 vials pre-loaded with steel balls.

2241-PE Polyethylene Vial
5 mL polyethylene vial with screw-on polyethylene cap. 1/2 in. diameter x 2 in. long (12.7 mm x 50.8 mm). Holds one 3/8 in. (9.5 mm) steel grinding ball (2155), fits 2240-PE Vial Set, 2663 Cryo-Block, and 2190 Vial Rack. Not pre-cleaned. Grinding load per vial 1.5 mL. Sold in units of 240. 2250 Pre-Cleaned 15 mL Polycarbonate

Vial Set

Each set includes 5 pre-cleaned 2251PC vials, each with a 7/16 in. (11 mm) steel grinding ball (2156). Ready to use, in a polyethylene carrier with foam vial holder. Carrier fits Geno/Grinder clamp; used in pairs. Grinding load per vial 6 mL. Vials can also be used with 2660 Cryo-Block. Case of 10 sets, each set containing 5 vials pre-loaded with steel balls.

2251PC Polycarbonate Vial
1 1/8 in. diameter x 1 2/3 in. long (28.6 mm x 43.2 mm). 15 mL polycarbonate vial with screw-on cap. Holds all sizes of grinding media up to 7/16 in. (11 mm) steel grinding balls (2156). Fits 2250 Vial Set, 2660 Cryo-Block.
Pre-cleaned. Grinding load per vial 6 mL. Sold in units of 100.


3116PC Polycarbonate Vial
1/2 in. diameter x 2 in. long (12.7 mm x 50.8 mm). 5 mL polycarbonate vial with slip-on polyethylene cap. Holds one 3/8 in. (9.5 mm) steel grinding ball (2155), fits 2190 Vial Rack. Grinding load per vial 1.5 mL. Sold in units of 100.

Cryogenic Accessories

2600 Cryo-Station
A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can
be placed in the Cryo-Station well to be filled and kept cold. The well can also hold a chilled cutting board to cut up sensitive samples for RNA analysis.

Cryo-Blocks for Cryogenic Grinding in the Geno/Grinder
Cryo-Blocks are made of aluminum. They hold and chill titer plates and vials to grind plant and animal tissue for nucleic acid and protein extractions. Cryo-blocks can be quickly chilled in the 2600 Cryo-Station, and will keep samples cold during grinding to preserve RNA and proteins from heat degradation. The 2650, 2660, 2662, and 2665 Cryo-Blocks have about the same footprint and height as deep-well titer plates, and fit the standard clamp. The 2661 and 2664 Cryo-Blocks fit the 2195 Large Capacity Clamp. Cryo-Blocks are sold in pairs because they are used two at a time, to keep the clamp in balance.

2650 Cryo-Adapter for Titer Plates
Extruded aluminum insert for 2210 Titer Plate. When inserted in titer plate and chilled in 2600 Cryo-Station, 2650 Cryo-Adapter keeps samples in titer plate cold during grinding, preserving RNA and proteins. Sold in pairs.

2660 Cryo-Block for 15 mL
Polycarbonate Vials Aluminum block holds six 2251PC vials, as used in 2250 Vial Set. Cryo-Blocks are chilled in 2600 Cryo-Station to preserve RNA and proteins during grinding. Sold in pairs.


2661 Cryo-Block for 15 mL Centrifuge Tubes
Aluminum block holds fifteen 15 mL conical bottom centrifuge tubes. Cryo-blocks are chilled in 2600 Cryo-Station to preserve RNA and proteins during grinding. Use with 2195 Large Capacity Clamp Assembly. Sold in pairs.

2662 Cryo-Block for 4 mL
Polycarbonate Vials Aluminum block holds twenty-four 2241-PC vials, as used in 2240-PC Vial Set. Cryo-Blocks are chilled in 2600 Cryo-Station to preserve RNA and proteins during grinding. Sold in pairs.

2663 Cryo-Block for 4 mL
Polyethylene Vials Aluminum block holds twenty-four 2241-PE vials, as used in 2240-PE Vial Set. Cryo-Blocks are
chilled in 2600 Cryo-Station to preserve RNA and proteins during grinding. Sold in pairs.

2664 Cryo-Block for 50 mL Centrifuge Tubes
Aluminum block holds six standard conical-bottom 50 mL centrifuge tubes for cryogenic milling. Cryo-Blocks are chilled in 2600 Cryo-Station to preserve RNA and proteins during grinding. Use with 2195 Large Capacity Clamp Assembly. Sold in pairs.

2665 Cryo-Block for Microcentrifuge or PCR Tubes
Aluminum block holds 96 standard (0.6 mL) microcentrifuge tubes. Cryo-Blocks are chilled in 2600 Cryo-Station to
preserve RNA and proteins during grinding. Sold in Pairs.

2666 Cryo-Block for 48 Microcentrifuge or PCR Tubes
Aluminum block holds 48 standard (1.5 - 2.0 mL) microcentrifuge tubes. Cryo-Blocks are chilled in
2600 Cryo-Station to preserve RNA and proteins during grinding. Sold in pairs.

Biotechnologies — other models of XRF equipment:

SPEX SamplePrep 2000 Geno/Grinder
print page to top

About company | News | Products | Downloads | Articles | Dealers | Partners | Contacts

Rambler's Top100 META-Ukraine

XRF analyzers and RoHS testing equipent - Elvatech.com — All Rights Reserved.WebSite created by — ABC.NET.UA