http://www.elvatech.com/en/catalog/materials/blending/good464?print=1

Grinding/Mixing Vials for 8000 Series Mixer/Mills



8001 Hardened Steel Vial Set

8001 Hardened Steel Vial Set

For wet or dry grinding/mixing. Vial size 21/4 in. (5.7 cm) diameter x 3 in. (7.62 cm) long. Vial body and cap liner made of hardened tool steel. Set includes screw-on cap with O-ring, two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls. Volume 65 mL; grinding load 310 mL; mixing load approximately 25 mL.

8001B Steel Ball Set

Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls for SPEX SamplePrep 8001 and 8009 Vial Sets.

 


8003 Alumina Ceramic Vial Set

8003 Alumina Ceramic Vial Set

For wet (use 8015 Clamp) or dry grinding/ mixing. Vial size 21/4 in. (5.7 cm) diameter x 23/4 in. (7.0 cm) long. Set includes high purity 99.5% alumina ceramic vial body and two slip-on caps, one 1/2 in. (12.7 mm) alumina ceramic ball, and eight corprene gaskets. Volume 45 mL; grinding load 28 mL; mixing load approximately 20 mL.

8003A Alumina Ceramic Ball

1/2 in. (12.7 mm) diameter alumina ceramic ball for SPEX SamplePrep 8003 Vial Set.

 


8015 Clamp with 8003 Vial Set

8015 Clamp for 8003 Vial Set

Clamps permit slurry grinding in SPEX SamplePrep 8003 Vial Set; sold in pairs. One pair required for each 8003.


8004 Tungsten Carbide Vial Set

8004 Tungsten Carbide Vial Set

For wet or dry grinding/mixing. Vial size 21/4 in. (5.7 cm) diameter x 21/2 in. (6.35 cm) long. Set includes tungsten carbide-lined body, two screw-on tungsten carbide-lined caps, two 7/16 in. (11.2 mm) tungsten carbide balls, and eight corprene gaskets. Volume 55 mL; grinding load 310 mL; mixing load approximately 25 mL.

8004A Tungsten Carbide Ball.

7/16 in. (11.2 mm) diameter tungsten carbide ball for SPEX SamplePrep 8004 and 8004SS Vial Sets.

8004SS Steel-Jacketed Tungsten Carbide Vial Set

8004SS Steel-Jacketed Tungsten Carbide Vial Set

For wet or dry grinding/mixing in extreme environments. Vial size 21/4 in. (5.7 cm) diameter x 21/2 in. (6.35 cm) long. The screw-on caps and body are 304 stainless steel, lined with tungsten carbide. Gaskets (part no. 39322) are Viton for enhanced resistance to heat and chemicals. Set includes two 7/16 in. (11.2 mm) tungsten carbide balls and six extra Viton gaskets (39322). Voume 55 mL; grinding load 3-10 mL; mixing load approximately 25 mL.

8005 Zirconia Ceramic Vial Set

8005 Zirconia Ceramic Vial Set

For wet or dry grinding/mixing. Vial size 21/2 in. (6.35 cm) diameter x 211/16 in. (6.8 cm) long. Set includes solid zirconia ceramic vial and slip-on cap, two 1/2 in. (12.7 mm) zirconia ceramic balls, and seven corprene gaskets. Volume 45 mL; grinding load 28 mL; mixing load approximately 20 mL.

8005A Zirconia Ceramic Ball

1/2 in. (12.7 mm) diameter zirconia ceramic ball for SPEX SamplePrep 8005 Vial Set.

8007 Stainless Steel Vial Set

8007 Stainless Steel Vial Set

For wet or dry grinding/mixing. Vial size 21/4 in. (5.7 cm) diameter x 3 in. (7.62 cm) long. Vial body and cap liner made of hardened 440C stainless steel. Set includes screw-on cap with O-ring, two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) stainless steel balls. Volume 65 mL; grinding load 310 mL; mixing load approximately 25 mL.

8007B Stainless Steel Ball Set

Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) hardened 440C stainless steel balls for SPEX SamplePrep 8007 Vial Set.

8008 Silicon Nitride Vial Set

8008 Silicon Nitride Vial Set

For wet or dry grinding/mixing. Vial size 21/2 in. (6.35 cm) diameter x 211/16 in. (6.8 cm) long. Set includes solid silicon nitride vial and slip-on cap, two 1/2 in. (12.7 mm) silicon nitride balls, and seven corprene gaskets. Volume 45 mL; grinding load 28 mL; mixing load approximately 20 mL.

8008A Silicon Nitride Ball

1/2 in. (12.7 mm) diameter silicon nitride ball for SPEX SamplePrep 8008 Vial Set.

8009 Round-Ended Hardened Steel Vial Set

8009 Round-Ended Hardened Steel Vial Set

For wet or dry grinding/mixing. Vial size 23/8 in. (6.0 cm) diameter x 3 in. (7.62 cm) long. Hardened steel vial body has grinding chamber with rounded ends for more efficient grinding/mixing. Includes screw-on cap, O-ring, two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls. Volume 35 mL; grinding load 310 mL; mixing load approximately 25 mL.

8014 Agate Vial Set

8014 Agate Vial Set

For dry grinding/mixing. Vial size 21/4 in. (5.7 cm) diameter x 23/4 in. (7.0 cm) long. Set includes all-agate vial body, two slip-on caps, two 1/2 in. (12.7 mm) agate balls, and eight corprene gaskets. Volume 45 mL; grinding load 38 mL; mixing load approximately 20 mL.

8014A Agate Ball

1/2 in. (12.7 mm) diameter agate ball for SPEX SamplePrep 8014 Vial Set.

8002 Polystyrene Vial, 21/8 in. (5.4 cm) x 21/2 in. (6.7 cm)

8002 Polystyrene Vial

For wet or dry mixing of liquids and powders. Vial size 21/8 in. (5.4 cm) diameter x 21/2 in. (6.7 cm) long. Polystyrene body with plastic screw-on cap. Volume 135 mL; mixing load approximately 50 mL. For use with SPEX SamplePrep 3112 or 8006A methacrylate balls. Sold in units of 100.

8006 Methacrylate Vial Set

8006 Methacrylate Vial Set

For wet or dry mixing of liquids and powders. Vial size 21/4 in. (5.7 cm) diameter x 25/8 in. (6.7 cm) long. Rugged construction allows grinding of soft materials without metallic contamination. Heavygauge methacrylate body with methacrylate-lined aluminum screw-on cap. Set includes corprene gasket, two 8006A 1/2 in. (12.7 mm) and four 3112 3/8 in. (9.5 mm) methacrylate balls. Volume 55 mL; mixing load approximately 25 mL.

6134 Polystyrene Vial, 1 in. (2.54 cm) x 3 in. (7.62 cm)

6134 Polystyrene Vial

For wet or dry mixing. Vial size 1 in. (2.54 cm) diameter x 3 in. (7.62 cm) long. Includes polyethylene slip-on cap. Volume 35 mL; mixing load approximately 15 mL. For use with SPEX SamplePrep 3112 or 8006A methacrylate balls. Sold in units of 100.

6135 Polyethylene Vial, 11/2 in. (3.81 cm) x 3 in. (7.62 cm)

6135 Polyethylene Vial

For wet or dry mixing. Vial size 11/2 in. (3.81 cm) diameter x 3 in. (7.62 cm) long. Polyethylene vial with attached cap. Volume 75 mL; mixing load approximately 40 mL. For use with SPEX SamplePrep 3112 or 8006A methacrylate balls. Sold in units of 100.

3112 Methacrylate Balls, 3/8 in. (9.5 mm)

3112 Methacrylate Balls

3/8 in. (9.5 mm) diameter methacrylate balls for all SPEX SamplePrep plastic vials. Sold in units of 100.

3119 Methacrylate Balls, 1/8 in. (3.2 mm)

3119 Methacrylate Balls

1/8 in. (3.2 mm) diameter methacrylate balls for all SPEX SamplePrep plastic vials. Sold in units of 100.

8006A Methacrylate Balls

1/2 in. (12.7 mm) diameter methacrylate balls for all SPEX SamplePrep plastic vials 3/4 in. ( 1.9 cm) and larger. Sold in units of 100.

 

Pulverizing and Blending — other models of XRF equipment:

SPEX SamplePrep 8000D Dual Mixer/Mill
SPEX SamplePrep 8000M Mixer/Mill
SPEX SamplePrep 5100 Mixer/Mill
SPEX SamplePrep 5200 Micro Hammer-Cutter Mill
Grinding Vials and Accessories for the 6770 SPEX SamplePrep Freezer/Mill

Elvatech company © 2018